Versions Compared

Old Version 26

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Placing Matboard When Cutting from the Back

Info

When the Cut Preview screen indicates that the current layer is to be cut from the Back of the mat, this also determines how to place the matboard onto the CMC. 

  • Have Two Layers of adequate size of disposable matboard under the Mat to be Cut; a Layer can be temporarily removed when cutting thicker matboard.

  • Place the matboard into the left corner of the CMC, making sure that the matboard nestles tightly into the Horizontal and Vertical Clamps.

expand
Insert excerpt
title
Backing Board
Definition

The Backing Boards are Two Sheets of matboard placed on the CMC behind the sheet of matboard being cut.

This protects the CMC’s metal surface and helps stabilize the mat being cut.

One sheet can be removed when cutting thicker material if needed.

Image Removed
Backing Board
nameBacking Board Definition
Image Modified

  • When cutting from the Back, make sure the front of the matboard is facing the CMC.

Z1BoardBackOfMatUP2024800.pngImage Removed
Z1BoardBackOfMatUP2024800.pngImage Added

  • See Options > Switch Between Front and Normal Tools on the Cut Preview.

    • See Options > Always use Normal Tool on the Cut Previewto toggle on/off this feature. See Options > Cut From Front on the Cut Previewto select whether to cut the design from the Front of the mat.See Options > Cut Front Tool on the Cut Previewto designate which cartridge to use when cutting from the front of the mat.Select Cut From Front toggle to select whether to cut the design from the Front of the mat on the Cut Preview.

    Default Settings