45 Degree Plus Drop | |
|---|---|
The 45 Degree Plus Cartridge* cuts the drop with a 45° bevel on thicker matboard such as 8-ply. *Older systems may have a yellow plastic 45°+ Cartridge. | |
 |
Select the 45 Degree Plus Drop Bevel Type | |
|---|---|
Select the 45°+ Tab on the Configurations screen. Select the specific Drop bevel type from the Current Bevel Type dropdown control.
| |
 |
Select the Area of Concern for 45 Degree Plus Drops Below: |
|---|
45 Degree Plus Drop Cuts the Wrong Depth When Using a SKU | |
|---|---|
Select this topic to adjust the Depth Bias. | |
 |
45 Degree Plus Drop Does Not Pause for Blade Change When Cutting | |
|---|---|
Select this topic to adjust the Plunge Count. | |
 |
45 Degree Plus Circle/Oval Drop Rotation Adjustments Using the Circle/Oval Rotation Utility | |
|---|---|
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals. | |
 |
45 Degree Plus Drop Exterior Backup is too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. | |
 |
45 Degree Plus Drop Exterior Backup is too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. | |
 |
45 Degree Plus Drop Exterior Overcut is too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. | |
 |
45 Degree Plus Drop Exterior Overcut is too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. | |
 |
45 Degree Plus Drop Interior Backup is too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. | |
 |
45 Degree Plus Drop Interior Backup is too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. | |
 |
45 Degree Plus Drop Interior Overcut is too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. | |
 |
45 Degree Plus Drop Interior Overcut is too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. | |
 |
45 Degree Plus Drop Cuts the Wrong Size | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. | |
 |
45 Degree Plus Drop has a Swoop | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Rotation. | |
 |
45 Degree Plus Drop has a Flare | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Rotation. | |
 |
45 Degree Plus Oval Drop has a Bump | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. | |
 |
45 Degree Plus Oval Drop has a Feather | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. | |
 |
Troubleshooting Button | |
|---|---|
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. | |
 |