Page Comparison

When you go to the Cut Preview, you have the option of using the default blade depth to cut the current mat, or you can click on the Blade Depth Button to select a different blade depth for each layer.

Have the desired layer selected.

Click on the Blade Depth Button.

On the Blade Depth Screen, enter the new blade depth value number under Opening.

The Label field allows you to make notes about the matboard used at this particular blade depth setting.

Select “Apply New Depth to All Layers” if you wish the same blade depth to be applied to all layers of the current mat.

Click OK.

The new blade depth number is listed next to the current layer.

The blade depth number is also displayed at the top of the screen for the current layer.

When you cut the mat, if the newly selected blade depth is different than the last blade depth used, you will be prompted for the blade cartridge and that the blade depth will be changed.

Once satisfied with the V-Groove blade depth, open the Blade Depth Screen and click on the V-Groove field.

Change the number to match the knob. In the Label field, enter a title such as “recommended for V-Grooves on paper mat”.

Click on the “Set as Default” button to make the current blade depth the default V-Groove blade depth setting.

In the Label field, enter a title such as “recommended for V-Grooves on paper mat”.

When cutting a V-Groove, you will be prompted that it will change the blade depth to the V-Groove depth.

Click Continue to cut the V-Groove.

After the V-Groove has finished cutting, you will be prompted that it will return the blade depth to the opening blade depth setting to cut the openings.

Click Continue.