Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Interior Backup Definition
Adjusting the Interior Backup
| Tip |
|---|
|
| Expand | ||
|---|---|---|
| ||
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts. |
Select the Bevel Type for the Interior Backup to be Edited:
Interior Backup on Openings
Problem:
The Interior Backup on Openings is cutting too long or too short.
| Tip |
|---|
|
Resolution:
If the Interior Backup is cut too Long, Decrease the Interior Backup.
If the Interior Backup is cut too Short, Increase the Interior Backup.
See Interior Backup on Openings for additional information.
| Expand | ||
|---|---|---|
| ||
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts. |
Interior Backup on Drops
Problem:
The Interior Backup for Drops is cutting too long or too short.
| Tip |
|---|
|
Resolution:
If the Interior Backup is cut too Long, Decrease the Interior Backup.
If the Interior Backup is cut too Short, Increase the Interior Backup.
See Interior Backup on Drops for additional information.
| Expand | ||
|---|---|---|
| ||
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts. |
Interior Backup on the Outside
Problem:
The Interior Backup for the Outside is cutting too long or too short.
| Tip |
|---|
|
Resolution:
If the Interior Backup is cut too Long, Decrease the Interior Backup.
If the Interior Backup is cut too Short, Increase the Interior Backup.
See Interior Backup on the Outside for additional information.
| Expand | ||
|---|---|---|
| ||
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts. |
Interior Backup on V-Grooves
Problem:
The Interior Backup for V-Grooves is cut too long or too short.
| Tip |
|---|
|
Resolution:
If the Interior Backup on the Inside Cut of the V-Groove is cut too Long, Decrease the Interior Backup.
If the Interior Backup on the Inside Cut of the V-Groove is cut too Short, Increase the Interior Backup.
See Interior Backup on V-Grooves for additional information.
| Expand | ||
|---|---|---|
| ||
The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove. |
Contents:
|
|