Cut Speeds Button | |
|---|---|
| |
Use the Cut Speeds screen to select the Cutting Speed for each of the individual licensed Cartridges.
| Expand | ||
|---|---|---|
| ||
A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool. |
Cut Speed Percentage
Enter the desired Cut Speed Percentage for each Cartridge type.
100% is cutting at Full Speed.
50% is cutting at Half Speed.
When that particular Cartridge is used next, it will use the new Cut Speed entered.
Slowing down the cut speed can help when cutting intricate designs to help prevent the Head from skipping on tight corners.
Contents:
|
| Expand | ||
|---|---|---|
| ||
A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool. |
Speed Percentage Example
This example shows that the 90 Degree Cartridge will cut at 50% speed.
Dense Material
| Info |
|---|
|
Click Dense Material if this is dense material and Click OK.
|
The user is prompted to adjust the Head Pressure to the High Setting.
|
|
Extra Dense Material
| Info |
|---|
|
Click Extra Dense Material if this is extra dense material and you are cutting it with the 90° Cartridge.
For instance, 50% is 50% of the standard Cutting Speed.
When you click Cut, the Head plunges at the Home position and applies the current Air Pressure.
User is prompted to adjust the Head Pressure to the High Setting.
|
|
No Speed Reduction
| Info |
|---|
|
Optionally, select No Automatic Speed Reduction for Depth of 16 and Above if you do not want the CMC to reduce speed when cutting thicker material.
Unselect No Automatic Speed Reduction for Depth of 16 and Above to let the CMC automatically reduce speed when cutting thicker material.
|
|
|
|
| title | Default Speed for Dense Material |
|---|
|
|
|
 |