Page Comparison

A 45° Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement.

The matboard is cut halfway through its thickness, revealing the core from the front.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• First Cut: Cuts the Interior cut into the Fallout Clockwise.

• Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

The black Black 45° Blade Cartridge is labeled “45” “45” with a 45° Angle Symbol on the Cartridge end.

The 45° Blade Cartridge does not support Blade Depths above 16.

Select V-Groove from the Current Bevel Type Dropdown Control to edit this configuration.