Content Comparison

Placing Matboard When Cutting from the Back

Info
When the Cut Preview screen indicates that the current layer is to be cut from the Back of the mat, this also determines how to place the matboard onto the CMC.

Panel

For Additional Information:

Tip
Default Settings: Cut from Front: Cutting Default Setting

See Options > Always use Normal Tool on the Cut Previewto toggle on/off this feature. See Options > Cut From Front on the Cut Previewto select whether to cut the design from the Front of the mat.See Options > Cut Front Tool on the Cut Previewto designate which cartridge to use when cutting from the front of the mat.

Select Cut From Front toggle to select whether to cut the design from the Front of the mat on the Cut Preview.

title

Have Two Layers of adequate size of disposable matboard under the Mat to be Cut; a Layer can be temporarily removed when cutting thicker matboard.
Place the matboard into the left corner of the CMC, making sure that the matboard nestles tightly into the Horizontal and Vertical Clamps.

Expand

Insert excerpt

	Backing Board

Definition

The Backing Boards are Two Sheets of matboard placed on the CMC behind the sheet of matboard being cut.

This protects the CMC’s metal surface and helps stabilize the mat being cut.

One sheet can be removed when cutting thicker material if needed.

Image Removed

	Backing Board
name	Backing Board Definition

Image Modified

When cutting from the Back, make sure the front of the matboard is facing the CMC.

Image Removed

Image Added

Default Settings
Cut from Front: Cutting Default Setting