Content Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Image Removed

Expand

title	Vertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

Image Removed

Adjusting the Vertical Adjustment

Tip
To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Make sure to select the desired tool from the Cartridge Tab (i.e.,Deboss, PenorVinyl),

Select the tool type you want to edit from the Current Bevel Type dropdown control (if applicable) before making adjustments.

Image Removed

If the Tool line is applied too far Up Vertically, Decrease the Vertical Adjustment.
See Vertical Adjustment for additional information.

Expand

title	Vertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

Image Removed

If the Tool line is applied too far Down Vertically, Increase the Vertical Adjustment.
See Vertical Adjustment for additional information.

Expand

title	Vertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

Image Removed InfoSee Also: The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.