Page Comparison

The 45°+ Reverse Bevel Opening is created by cutting into the thicker matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface, hiding the matboard core from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The black 45°+ Blade Cartridge is labeled with a 45° Angle Symbol and Plus Symbol on the end.

The 45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.