Page Comparison

The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).  

If the Exterior Backup is leaving a Hook in the corner, Increase the Exterior Backup.

If the Exterior Backup is cut Too Long, Decrease the Exterior Backup.

If the Exterior Backup is cut Too Short, Increase the Exterior Backup.

The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

Image Removed

Image Removed

See: Exterior Backup for Openings Configurations

See: Exterior Backup for Drops Configurations

See: Exterior Backup for the Outside Configurations

See: Exterior Backup for V-Grooves Configurations

See: Exterior Backup for Creases Configurations

The V-Groove Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of the Outside Cut of the V-Groove.

The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).   

If the Exterior Backup on the Outside Cut of the V-Groove is cut Too Long, Decrease the Exterior Backup.

If the Exterior Backup on the Outside Cut of the V-Groove is cut Too Short, Increase the Exterior Backup.

Image Removed

Image Removed

See: V-Groove Exterior Backup Configurations

The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).  

If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut.

Image Removed

Image Removed

See: Exterior Overcut for Openings Configurations

See: Exterior Overcut for Drops Configurations

See: Exterior Overcut for the Outside Configurations

See: Exterior Overcut for V-Grooves Configurations

See: Exterior Overcut for Creases Configurations

The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).  

If the Exterior Overcut on the Outside Cut of the V-Groove is cut Too Short, Increase the Exterior Overcut.

Image Removed

Image Removed

See: V-Groove Exterior Overcut Configurations

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Openings.

The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

Image Removed

Image Removed

See: Interior Backup for Openings Configurations

See: Interior Backup for Drops Configurations

See: Interior Backup for the Outside Configurations

See: Interior Backup for V-Grooves Configurations

The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

If the Interior Backup on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Backup.

If the Interior Backup on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Backup.

Image Removed

Image Removed

See: V-Groove Interior Backup Configurations

The Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of Openings.

The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

If the Interior Overcut is cut Too Short, Increase the Interior Overcut.

Image Removed

Image Removed

See: Interior Overcut for Openings Configurations

See: Interior Overcut for Drops Configurations

See: Interior Overcut for the Outside Configurations

See: Interior Overcut for V-Grooves Configurations

The V-Groove Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove.

The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Overcut on V-Grooves.

If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves.

Image Removed

Image Removed

See: V-Groove Interior Overcut Configurations

Using the Backup and Overcut Display on the Cut Preview for Troubleshooting
Info See Using the Backup and Overcut Display on the Cut Preview for Troubleshooting the backups Backups and overcuts Overcuts displayed on the Cut Preview. Expand title Cut from Front Full Definition Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview. On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner: Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel. Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat. V-Grooves have their own selection on the list. If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.   Image RemovedImage Removed
Expand
title Exterior Backup General Definition
Expand
title Exterior Backup on V-Groove Definition
Expand
title Exterior Overcut General Definition
Expand
title V-Groove Exterior Overcut of V-Grooves Definition
Expand
title Interior Backup General Definition
Expand
title Interior Backup on V-Grooves Definition
Expand
title Interior Overcut General Definition
Expand
title Interior Overcut of V-Grooves Definition
Image RemovedImage RemovedImage RemovedImage AddedImage AddedImage Added