Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Vertical Adjustment for Non-Blade Cartridges Definition
| title | Vertical Adjustment Definition |
|---|
Adjusting the Vertical Adjustment
| Tip |
|---|
|
Select the Tool and Type
Select the tool type you want to edit from the Current Bevel Type dropdown control (if applicable) before making adjustments.
Tool Line Too Far Up
Problem:
The tool line is applied too far up vertically.
| title | Vertical Adjustment Definition |
|---|
Resolution:
Decrease the Vertical Adjustment.
See Vertical Adjustment for additional information.
Tool Line Too Far Down
Problem:
The tool line is applied too far down Vertically.
| title | Vertical Adjustment Definition |
|---|
Resolution:
Increase adjust the Vertical Adjustment.
See Vertical Adjustment for additional information.
See Also: Opening Cuts in the Wrong Place Vertically when not cutting the Outside
Problem:
The opening cuts in the wrong place Vertically.
| Expand | ||
|---|---|---|
| ||
The Vertical Home defines the global vertical placement of objects cut with the blade cartridges. |
Resolution:
If too far down, increase the Vertical Home.
If too far up, decrease the Vertical Home.
See Vertical Home for additional information.
Contents:
|  |