Versions Compared

Old Version 20

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Outside Rotation on V-Grooves Definition

Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • A Swoop on the Outside cut of the V-Groove is where the corners Curve Inward toward the opening.

    • If the Outside cut of the V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand
titleSwoop in the Outside Cut of a
Non-Oval
V-Groove Full Definition

A Swoop on the Outside Cut of the V-Groove is where the corners

curve inward

Curve Inward toward the opening.

If the Outside cut of the V-Groove cuts with a Swoop, Decrease the Outside Rotation.

The Outside Rotation on

Non-Oval

V-Grooves controls for Swoops and Flares in the Outside cut of the

Non-Oval V-Grooves

V-Grooves.

Image AddedImage Added

See: Outside Rotation on V-Grooves Configurations

Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the opening.

    • If the Outside

Non-Oval

    • cut of the V-Groove cuts with a

Swoop

    • Flare,

Decrease
Expand
titleFlare in the Outside Cut of a V-Groove Full Definition

A Flare on the Outside Cut of

aNon-Oval

the V-Groove is where the corners

curve away

Curve Away from the opening.

If the Outside cut of the V-Groove cuts with a Flare, Increase the Outside Rotation.

The Outside Rotation on

Non-Oval

V-Grooves controls for Swoops and Flares in the Outside cut of the

Non-Oval

V-Grooves.

  • If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

    • Image RemovedImage Removed

    Image AddedImage Added

    See: Outside Rotation on V-Grooves Configurations

    Expand
    titleHow to Adjust the Configurations

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    		Image AddedImage Added