Versions Compared

Version Old Version 2 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Add
Image Added

Related Training:

Wizard University Course: 108: The Mixed Template

Info

  • The #106 Mixed template allows the user to select a different template for each layer.

  • Use the Template Properties to edit the individual proprietary adjustments available for the template objects.

Select #106 Mixed from template library and place on the work space.

Editing the Mixed Opening

With the Mixed opening selected, click on the Properties tab.

On the reveals tab under # ID, select the desired template number for each layer.

Click and drag template numbers from one layer to another to move them.

Click on the Parameters tab and adjust parameters for each layer as desired.

NOTE: Not all templates are available for this template design.

NOTE: The Fillet is a subcomponent of the #106 Mixed Opening. You can either select #106 Mixed Opening and select #107 Fillet for the 2nd or greater layer, OR select #107 Fillet as an opening which will automatically place it within the #106 Mixed.

NOTE: If you change to a Mixed template from another template, it will attempt to use the new template if allowed, otherwise it will default to #101 Rectangle.

Mixed Opening

Label: Enter a Label for this object if desired.

Change to Template: Click to select a different template from the template library.

Dimensions

Width/Height: Change width/height of opening.

  • Click Sizes to select recent or standard sizes.

  • Click Swap to switch numbers between width/height.

Image Removed

Reveals Tab (Options)

# Layers: Select number of layers.

#ID: Template design # shows template number for the current layer.

Click on the down arrow to access the template library and select a new template.

Click and drag template numbers from one layer to another to move them.

Reveal: Enter reveal amount.

Cartridge Icon: Click on the Cartridge Icon and select the desired Cartridge for this layer.

Default Cartridge is the 45° normal bevel Cartridge. If a Cartridge is not licensed, it will be disabled.

RB: Select RB to make this layer reverse bevel.

Image Removed

Parameters Tab (Options)

Adjust parameters for the current template as desired.

Image Removed

Insert excerpt
Templates Definition
Templates Definition
nameTemplates Definition

Image Added
Info

  • This example shows the Mixed Template using template 606 Arrow Hd Sm on the top layer and template 604 Taos on the bottom layer.

Template106MixedPlaced70800.pngImage Added

#106 Mixed Template Properties

  • Place the #106 Mixed Template on the Editor.

  • Click on the #106 Mixed Template on the Editor.

  • Click on the Properties Tab to edit the individual proprietary adjustments available for this template opening.

  • Optionally, Right-Click on the template opening and select Properties to open the Template Properties.

PropertiesTemplate106Mixed70800.pngImage Added

Template Opening

Template Opening

Info

  • Change the Template with the Template Name and Number Button.

  • Click Template Name and Number button.

  • The Template Library opens.

  • Select a different template from the Template Library.

  • The template will be updated to the new template.

Label

  • Enter the desired text in the Label field.

  • The label will be displayed on the Template opening. 

TemplateOpeningStyle106Mixed70800.pngImage Added

Dimensions

  • Enter the Template Width dimension. 

  • Enter the Template Height dimension. 

Insert excerpt
Sizes Button
Sizes Button
nameSizes Button Definition

TemplateSizes106Mixed70800.pngImage Added

Lock or Unlock Size

  • Click the Unlock icon toggle to Lock the size of the current template opening. 

  • Click the Locked icon toggle to Unlock the size of the current template opening.

Insert excerpt
Lock Object Size
Lock Object Size
nameLock Object Size Definition

TemplateSizesLockedUnlocked106Mixed70800.pngImage Added

X and Y Position Fields

Info

  • Use the X/Y fields to move objects to specific Horizontal/Vertical coordinates.

    • *Lines shown for illustration.

  • Enter the new X position to move the selected object Horizontally.

  • Enter the new Y to move the selected object Vertically.

Insert excerpt
X and Y Position
X and Y Position
nameX and Y Position Definition

XPositionFieldTemplate106Mixed70800.pngImage Added

Rotation Entry Field

  • Enter the desired Degree of Rotation in the Rotation field.

Info

  • The currently selected Template will pivot from the center point.  

Insert excerpt
Rotation of Objects in the Design Editor
Rotation of Objects in the Design Editor
nameRotation Designer

TemplateRotate106Mixed70800.pngImage Added

Template Options Reveal Tab

Number of Layers

  • Enter the number of Layers desired.

Layers for this template opening. 

Info

  • Each Layer entry is identified by a layer number.

  • The topmost layer is labelled Top.

Insert excerpt
Layer Definition
Layer Definition
nameLayers Definition

Reveal

  • Enter the desired Reveal amount for each layer in the Reveal field. 

Info

  • The topmost layer is labelled Top.

Insert excerpt
Reveal
Reveal
nameReveal Definition

TemplateOptionsRevealProperties106Mixed70800.pngImage Added

Cartridge Icon

  • Click on the Cartridge Icon and select the desired Cartridge for the current Layer. 

Info

  • NOTE: Not all Cartridges are available in this scenario.

  • To use a Non-Blade Cartridge, see “Availability of Other Cartridges” below.

Insert excerpt
Cartridge
Cartridge
nameCartridge Definition
Insert excerpt
Cartridges Available Only Under Specific Conditions
Cartridges Available Only Under Specific Conditions
nameCartridges Available Only Under Certain Circumstances

TemplateOptionsCartridge106Mixed70800.pngImage Added

Reverse Bevel

Info

  • Click the RB Button to make all of the layers a Reverse Bevel. 

  • Click the RB Checkbox on the desired layer to make only that layer a Reverse Bevel.  

Insert excerpt
Reverse Bevel Opening
Reverse Bevel Opening
nameReverse Bevel Opening

TemplateOptionsRevealRB106Mixed70800.pngImage Added

Template Options Parameters

Info

  • Use the Template Options Parameters tab to edit the parameter attributes for the selected template. 

  • The 106 Mixed Template allows a different template to be assigned to each layer, so these attributes are directly related to the layer selected. 

  • Select the desired layer to edit from the Params for Layer field, and edit the Parameters for that template. 

  • The design reflects the changes immediately.

Info

  • See Template Parameter Map below for information on what the specific fields adjust.

Insert excerpt
Parameters
Parameters
nameParameters Definition

TemplateOptionsParamProperties106Mixed70800.pngImage Added

Template Parameter Map

Info

  • The Template Parameter Map displays a diagram describing each parameter field for the current template.

  • Click on the desired Template opening.

  • Click the Parameters tab on the Properties Tab.

  • Click on the Template Parameter Map button (displayed as [?]) on the Parameters tab.

  • The Template Parameter Map will display what each parameter field adjusts for in the currently selected template layer of the 106 Mixed.

TemplateMap106Mixed70800.pngImage Added

Assigning a Template to Each Layer

  • Click the Reveals tab and select the desired Layer.

  • Click the Template Name Number button to open the Template Library.

Template106MixedPlacedHighlight70800.pngImage Added

  • Click on the desired Template.

  • The new template will be placed on the selected layer.

Info

  • NOTE: Not all templates are available for use with this template.

Template106MixedPlacedNewHighlight70800.pngImage Added

Availability of Other Cartridges

Info

  • You cannot directly select a Non-Blade Cartridge for a Template Layer.

  • You must place the Non-Blade Cartridge object first and then edit it to display the desired Template shape.

  • For this example, place a Deboss object onto the Editor.

  • With the Deboss selected click the Properties tab.

  • Click the Template Number and Name button.

  • The Template Library will open.

  • Select a different template SHAPE for the Deboss. 

    • Templates not available for this function are not displayed.  

  • The Deboss shape will change to this template shape.

Info

  • Do not click the Change to Template button, as that will change the Deboss to the Template instead of changing the Deboss shape.

Insert excerpt
Non-Blade Tool Cartridge (Deboss/Pen/Vinyl/Crease)
Non-Blade Tool Cartridge (Deboss/Pen/Vinyl/Crease)
nameNon-Blade Tool Cartridge Definition

DebossTemplateName70800.pngImage Added

Default Settings