changes.mady.by.user dani.simmonds
Saved on Mar 30, 2023
Saved on Jun 12, 2024
A Swoop on the Outside cut of the V-Groove is where the corners Curve Inward toward the opening.
If the Outside cut of the V-Groove cuts with a Swoop, Decrease the Outside Rotation.
A Swoop on the Outside Cut of the V-Groove is where the corners Curve Inward toward the opening.
The Outside Rotation on
V-Grooves controls for Swoops and Flares in the Outside cut of the
V-Grooves.
See: Outside Rotation on V-Grooves Configurations
A Flare on the Outside cut of the V-Groove is where the corners
Curve Away from the opening.
If the Outside
cut of the V-Groove cuts with a
Flare,
Increase the Outside Rotation.
A Flare on the Outside Cut of
the V-Groove is where the corners
cut of the V-Groove cuts with a Flare, Increase the Outside Rotation.
The Outside Rotation on V-Grooves controls for Swoops and Flares in the Outside cut of the V-Grooves.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
