Back bevel type names will be displayed with no further label; i.e., Normal Bevel. Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat. V-Grooves have their own selection on the list.
If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  Image Modified Image Modified | 
