Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Exterior Overcut Definition
| Info |
|---|
|
Select the Bevel Type for the Exterior Overcut to be Edited:
Exterior Overcut on Openings
Problem:
The Exterior Overcut on Openings is cut too long/too short.
Resolution:
Edit the Exterior Overcut on Openings.
Normal Bevel
Reverse Bevel
Normal Bevel-Front of Mat
Reverse Bevel-Front of Mat
Exterior Overcut on Drops
Problem:
The Exterior Overcut on Drops is cut too long/too short.
Resolution:
Adjust the Exterior Overcut on Drops.
Normal Drop
Reverse Drop
Normal Drop-Front of Mat
Reverse Drop-Front of Mat
Exterior Overcut on the Outside
Problem:
The Exterior Overcut for Outsides is cut too long/too short.
Resolution:
Adjust the Exterior Overcut on the Outside.
Outside
Outside-Front of Mat
Exterior Overcut on V-Grooves
Problem:
The Exterior Overcut for V-Grooves is cut too long/too short.
Resolution:
Adjust the Exterior Overcut on V-Grooves.
V-Grooves
Exterior Overcut on Creases
Problem:
The Exterior Overcut on Creases is applied too long/too short.
Resolution:
Adjust the Exterior Overcut on Creases.
Crease
Contents:
|
|