Page Comparison

A 45° Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement.

The matboard is cut halfway through its thickness, revealing the core from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• First Cut: Cuts the Interior cut into the Fallout Clockwise.

• Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

The black 45° Blade Cartridge is labeled “45” with a 45° Angle Symbol on the end.

The 45° Blade Cartridge does not support Blade Depths above 16.

Select V-Groove from the Current Bevel Type Dropdown Control to edit this configuration.