Cartridges Involved
This Configuration element involves the following Cartridges.
Note: Not all cartridges are available for all CMC models.
Exterior Overcut Definition
The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.
The Exterior cuts into the matboard, not the fallout.
The Exterior Overcut field is marked with a Red Arrow.
Select the Bevel Type for the Exterior Overcut to be Edited:
Exterior Overcut on Openings
Problem:
The Exterior Overcut on Openings is cut too long/too short.
Resolution:
Edit the Exterior Overcut on Openings.
Normal Bevel
Reverse Bevel
Normal Bevel-Front of Mat
Reverse Bevel-Front of Mat
Exterior Overcut on Drops
Problem:
The Exterior Overcut on Drops is cut too long/too short.
Resolution:
Adjust the Exterior Overcut on Drops.
Normal Drop
Reverse Drop
Normal Drop-Front of Mat
Reverse Drop-Front of Mat
Exterior Overcut on the Outside
Problem:
The Exterior Overcut for Outsides is cut too long/too short.
Resolution:
Adjust the Exterior Overcut on the Outside.
Outside
Outside-Front of Mat
Exterior Overcut on V-Grooves
Problem:
The Exterior Overcut for V-Grooves is cut too long/too short.
Resolution:
Adjust the Exterior Overcut on V-Grooves.
V-Grooves
Exterior Overcut on Creases
Problem:
The Exterior Overcut on Creases is applied too long/too short.
Resolution:
Adjust the Exterior Overcut on Creases.
Crease
Contents:
|
|