Cartridges Involved |
---|
This Configuration element involves the following Cartridges. Info |
---|
Note: Not all cartridges are available for all CMC models. |
| Image Removed |
Bevel Type Examples |
---|
Expand |
---|
title | Bevel Type Definition |
---|
|
|
Bevel Types determine whether the bevel in the matboard is displayed or not displayed, whether it is cut as an opening, outside, drop, or applied in a different format such as a V-Groove. |
Image Removed | Normal Bevel |
---|
Expand |
---|
title | Normal Bevel Definition |
---|
|
A Normal Bevel opening displays an exposed bevel in the face of the matboard. |
45 Degree Normal Bevel Opening
The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Image Added |
| Image Added |
Normal Bevel Opening |
---|
Expand |
---|
title | Normal Bevel Definition |
---|
| The Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel away from the matboard surface. The matboard core is visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. Image AddedImage AddedSee: 45 Degree Normal Bevel Opening Configurations See: 45 Degree Plus Normal Bevel Opening Configurations |
|
** - Front of Mat*See Normal Bevel - Front of Mat below for editing configurations when cutting from the front of the mat.
**See 45 Degree Front Normal Bevel Opening - Front of Mat below for the 45 Degree Front Cartridge Configurations.
Image Removed | Reverse Bevel |
---|
Expand |
---|
title | Reverse Bevel Definition |
---|
|
A Reverse Bevel opening displays no exposed bevel in the face of the matboard. |
45 Degree Reverse Bevel Opening
| Image Added |
Reverse Bevel Opening |
---|
Expand |
---|
title | Reverse Bevel Definition |
---|
| The Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. Image AddedImage AddedSee: 45 Degree Reverse Bevel Opening Configurations See: 45 Degree Plus Reverse Bevel Opening Configurations |
|
** - Front of Mat*See Reverse Bevel - Front of Mat below for editing configurations when cutting from the front of the mat.
**See 45 Degree Front Reverse Bevel Opening - Front of Mat below for the 45 Degree Front Cartridge .Image Removed | Normal Drop |
---|
Info |
---|
A Normal Drop is the fallout that is cut from the back* of the mat, which displays an exposed bevel on the face of the matboard.
When cutting an Open V-Groove, the inside cut uses the Normal Drop bevel configuration and the outside cuts with a Normal Bevel configuration. | Image Added |
Normal Bevel Drop |
---|
Expand |
---|
title | Normal Bevel Drop Definition |
---|
|
|
A Drop is a drop that displays an exposed bevel on the face of the matboard.*See Normal Drop - Front of Mat below for editing configurations when cutting from the front of the mat.
**See 45 Degree Front Normal Drop - Front of Mat below for the 45 Degree Front Cartridge Configurations.
Image Removed | Reverse Drop |
---|
Info |
---|
A Reverse Drop is the fallout that is cut from the back* of the mat, which does not display an exposed bevel on the face of the matboard. When cutting a Reverse Bevel Open V-Groove, the inside cut uses the Reverse Drop bevel configuration and the outside cuts with a Reverse Bevel configuration.
|
Expand |
---|
title | Reverse Drop Definition |
---|
|
A Reverse Drop Bevel is a drop that displays no exposed bevel on the face of the matboard. |
*See Reverse Drop - Front of Mat below for editing configurations when cutting from the front of the mat.
**See 45 Degree Front Reverse Drop - Front of Mat below for the 45 Degree Front Cartridge Configurations.
Image Removed | Outside |
---|
Expand |
---|
title | Outside Bevel Definition |
---|
|
The Outside Bevel cut of the mat does not display an exposed bevel on the face of the matboard. |
45 Degree Outside
45 Degree Plus Outside**45 Degree Front Outside - Front of Mat
52 Degree Outside90 Degree Outside*See Outside - Front of Mat below for editing configurations when cutting from the front of the mat.
**See 45 Degree Front Outside - Front of Mat below for the 45 Degree Front Cartridge Configurations.
Image Removed | Normal Bevel - Front of Mat |
---|
Expand |
---|
title | Normal Bevel Definition |
---|
|
A Normal Bevel opening displays an exposed bevel in the face of the matboard. |
*See Normal Bevel above for editing configurations when cutting from the back of the mat.
Image Removed | Reverse Bevel - Front of Mat |
---|
Expand |
---|
title | Reverse Bevel Definition |
---|
|
A Reverse Bevel opening displays no exposed bevel in the face of the matboard. |
*See Reverse Bevel above for editing configurations when cutting from the back of the mat.
Image Removed | Normal Drop - Front of Mat |
---|
Info |
---|
A Normal Drop - Front of Mat is the fallout that is cut from the front* of the mat, which displays an exposed bevel on the face of the matboard. When cutting an Open V-Groove from the front, the inside cut uses the Normal Drop - Front of Mat bevel configuration and the outside cuts with a Normal Bevel - Front of mat configuration.
|
Expand |
---|
title | Normal Drop Definition |
---|
|
A Normal Drop Bevel is a drop that displays an exposed bevel on the face of the matboard. |
*See Normal Drop above for editing configurations when cutting from the back of the mat.
Image Removed | Reverse Drop - Front of Mat |
---|
Info |
---|
A Reverse Drop - Front of Mat is the fallout that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard. When cutting a Reverse Bevel Open V-Groove from the Front, the inside cut uses the Reverse Drop - Front of Mat bevel configuration and the outside cuts with a Reverse Bevel - Front of Mat configuration.
|
Expand |
---|
title | Reverse Drop Definition |
---|
|
A Reverse Drop Bevel is a drop that displays no exposed bevel on the face of the matboard. |
*See Reverse Drop above for editing configurations when cutting from the back of the mat.
Image Removed | Outside - Front of Mat |
---|
Expand |
---|
title | Outside Bevel Definition |
---|
|
The Outside Bevel cut of the mat does not display an exposed bevel on the face of the matboard. |
45 Degree Outside - Front of Mat
45 Degree Plus Outside - Front of Mat45 Degree Front Outside - Front of Mat
52 Degree Outside - Front of Mat90 Degree Outside - Front of Mat*See Outside above for editing configurations when cutting from the back of the mat.
Image Removed | V-Groove |
---|
Expand |
---|
|
A Closed V-Groove is a decorative channel that is cut about halfway through the thickness of the matboard, exposing the matboard core. |
45 Degree V-Groove45 Degree Plus V-Groove45 Front V-Groove
52 Degree V-GrooveImage Removed | Cutting Configs for Open V-Grooves | Image Added |
Reverse Bevel Drop |
---|
| Image Added |
Outside Bevel |
---|
| Image Added |
Closed V-Groove |
---|
Expand |
---|
title | Closed V-Groove Definition |
---|
| The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front. First Cut: Cuts the Interior cut into the Fallout Clockwise. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise. Select V-Groove from the Current Bevel Type dropdown control to edit this configuration. Image AddedImage AddedSee: 45 Degree Closed V-Groove See: 45 Degree Plus Closed V-Groove See: 45 Front Closed V-Groove See: 52 Degree Closed V-Groove |
| Image Added |
Open V-Groove |
---|
Normal Bevel Open V-Groove Expand |
---|
title | Normal Bevel Open V-Groove Definition |
---|
|
|
An The Normal Bevel Open V-Groove |
|
is a decorative channel that is cut through the matboard, exposing a channel of involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart. Both the matboard core and the lower layer matboard are visible from the front. |
|
The bevels of the Open V-Groove are displayed.Image Removed | Image Added |
Reverse Bevel Open V-Groove Expand |
---|
title | Reverse Bevel Open V-Groove |
---|
|
|
DefinitionAn The Reverse Bevel Open V-Groove |
|
is a decorative channel that is cut through the matboard, exposing a channel of involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard is visible from the front. |
|
The bevels of the Open V-Groove are not displayed.The first cut is the interior V-Groove line and cut into the V-Groove fallout and not the matboard, and is cut in a clockwise direction.
45 Degree Reverse Drop
45 Degree The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening. Select Reverse Drop or Reverse Drop-Front of Mat |
|
Image Removed | Image Added |
|
---|
Expand |
---|
title | Cartridge Definition |
---|
| A Cartridge is |
|
a the physical component that |
|
contains a blade, stylus, pen or other apparatus that can be inserted into the head to perform a function, such as cutting, Debossing, Pen, etc.Image Removedholds the Blade, Deboss Stylus, Pen or other application tool. Image Added |
| Image Added |