Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Removed

Contents:

Child pages (Children Display)
alltrue
depth0
allChildrentrue
style
sortAndReverse
first0

Insert excerpt
FrameShop7x:Vertical Adjustment for Non-Blade Cartridges
Definition InfoThe Vertical Adjustment controls where the Tool
(Deboss
,
/Pen
or Vinyl) is applied Vertically.Image Removed

Select the Tool and Type

Make sure to select the desired tool from the Cartridge Tab (i.e.,Deboss, PenorVinyl),
  • Select the tool type you want to edit from the Current Bevel Type dropdown control (if applicable) before making adjustments.

  • Image Removed

    Tool Line Too Far Up

    Problem:

    • The tool line is applied too far up vertically.

    Expand
    titleVertical Adjustment Definition

    The Vertical Adjustment controls specifically where the tool is placed Vertically.

    Resolution:

    Info
    • To adjust, click plus/minus on the field about five times.

    • Click OK and do another test cut.

    • Continue making adjustments until the desired outcome is achieved.

    Image Removed

    Tool Line Too Far Down

    Problem:

    • The tool line is applied too far down Vertically.

    Expand
    titleVertical Adjustment Definition

    The Vertical Adjustment controls specifically where the tool is placed Vertically.

    Resolution:

    Info
    • To adjust, click plus/minus on the field about five times.

    • Click OK and do another test cut.

    • Continue making adjustments until the desired outcome is achieved.

    Image Removed

    See Also: Opening Cuts in the Wrong Place Vertically when not cutting the Outside

    Problem:

    • The opening cuts in the wrong place Vertically.

    Expand
    titleVertical Home Definition

    The Vertical Home controls specifically where the opening is cut Vertically.

    Resolution:

    • If too far down, increase the Vertical Home.

    • If too far up, decrease the Vertical Home.

    • See Vertical Home for additional information.

    Image Removed
    /Vinyl): Definition
    FrameShop7x:Vertical Adjustment for Non-Blade Cartridges (Deboss/Pen/Vinyl): Definition
    nameVertical Adjustment
    VertAdjustmentDebossWide70800.pngImage Added