Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Contents:
|
|
Select the Tool and Type
Select the tool type you want to edit from the Current Bevel Type dropdown control (if applicable) before making adjustments.
Tool Line Too Far Up
Problem:
The tool line is applied too far up vertically.
| Expand | ||
|---|---|---|
| ||
The Vertical Adjustment controls specifically where the tool is placed Vertically. |
Resolution:
Decrease the Vertical Adjustment.
The Tool Line will move Down.
| Info |
|---|
|
Tool Line Too Far Down
Problem:
The tool line is applied too far down Vertically.
| Expand | ||
|---|---|---|
| ||
The Vertical Adjustment controls specifically where the tool is placed Vertically. |
Resolution:
Increase adjust the Vertical Adjustment.
The Tool Line will move Up.
| Info |
|---|
|
See Also: Opening Cuts in the Wrong Place Vertically when not cutting the Outside
Problem:
The opening cuts in the wrong place Vertically.
| Expand | ||
|---|---|---|
| ||
The Vertical Home controls specifically where the opening is cut Vertically. |
Resolution:
If too far down, increase the Vertical Home.
If too far up, decrease the Vertical Home.
See Vertical Home for additional information.
|  |