| title | Crease Definition |
|---|
See: Add Crease Opening Function
See: Crease Cartridge Configurations
Override Thickness Auto-Adjust
Optionally, click the Override Thickness Auto-Adjust checkbox to retain the currently selected tool regardless of the thickness value entered.
Box Templates and Dimensions | |||
|---|---|---|---|
|  | ||
Box Thumbnail
| Info |
|---|
|
Select the desired box template from the Box Template dropdown control.
The thumbnail for the selected box template is displayed.
Box Template
| Info |
|---|
|
Select the desired box template from the Box Template dropdown control.
Box Dimensions
| Info |
|---|
|
Enter in the desired Sizes, such as Length, Width, Depth and Thickness of the box.
The example box displayed here only has Width because it controls both the Width and Height because it is a square corner protector.
Box Depth
Enter the Depth of the box to be made in the Depth field.
Box Thickness
| Info |
|---|
|
Enter the thickness for the material the box is being cut from in the Thickness field.
| Tip |
|---|
|
Thickness: Deboss
Enter the thickness of 3/32” and below for the material the box is being cut from in the Thickness field to use the Deboss cartridge to create fold lines.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| Tip |
|---|
|
| Expand | ||
|---|---|---|
| ||
The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design. There are three Deboss stylus sizes: Wide, Medium, Thin. In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs. |
Thickness: Crease
Enter the thickness of 1/8” and above for the material the box is being cut from in the Thickness field to use the Crease cartridge to create fold lines
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| Tip |
|---|
|
Contents:
| |