Versions Compared

Old Version 15

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Remnant Trimming Definition

    • Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Removed

See: Remnant Trimming Function

Cut the Outside As Designed: Cut Preview Outside Cut Options

  • Select As Designed from the Outside Cut Options dropdown control to cut the Outside as originally designed on the CMC Z1, Z (9000z), 9000 and 8000+.

info

    • This can be helpful when coming from Traceor Nesting where you have already determined how you want the Outside to be cut.

  • If you have Remnant Trimming on, it will also cut off the scrap edge.

Expand
titleImage Removed

Advanced Outside Options

The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control.Click the Set Advanced Options button on theCut Preview screen.Image Removed
Image Removed

  • This can be helpful when coming from Trace or Nesting where you had already selected how you want the Outside(s) to be cut.  

  • If you have Remnant Trimming on, it will also cut off the scrap edge.

Expand
titleRemnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Removed

See: Remnant Trimming Function

Image Removed

Defaults: Set the Default for Cutting the Outside 

Expand
titleDefault Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Removed

Defaults: Set the Default for 90 Degree Outside Cut

Expand
titleDefault Setting for the 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Advanced Options

Expand
titleDefault Setting for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Cut Mode

Expand
titleDefault Setting for the Default Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Removed
Image Added

Default Settings