Cut the Full Outside Edge: Cut Preview Outside Cut Options | ||
|---|---|---|
| title |  |
Advanced Outside Options
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control.
Click the Set Advanced Options button on the Cut Preview screen.
On the Advanced Outside Options screen, set the Cut Mode to Full.
The Cut Mode matches the selections from the Outside Cut Options as described above.
The full Outside edge of the design or Tiled designs will be cut.
If you have Remnant Trimming on, it will also cut off the scrap edge.
| Expand | ||
|---|---|---|
| ||
Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier. |
Defaults: Set the Default for Cutting the Outside
| Expand | ||
|---|---|---|
| ||
The default setting for Cutting the Outside can be set in the Admin > Editor section. |
Defaults: Set the Default for 90 Degree Outside Cut
| Expand | ||
|---|---|---|
| ||
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |
Defaults: Set the Default for the Advanced Options
| Expand | ||
|---|---|---|
| ||
The default setting for the Advanced Options can be set in the Admin > Cutting section. |
Defaults: Set the Default for the Cut Mode
| title | Default Setting for the Cut Mode |
|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section.
|