Page Comparison

Outside Bevel Definition

Panel

The Outside Bevel is when the Angle of the blade cuts the Fallout surface so it Slants Under the surface of the Fallout, and the Matboard Core is Not Seen from the front.

Expand

title	Outside Bevel Full Definition

The Outside Bevel is

created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface or simply cut at 90°.
The matboard core is not visible from the front.
The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
Select Outside or Outside-Front of Mat from the Current Bevel Type

dropdown control

Image Removed

Info

See: 45 Degree Plus Outside Configurations

See: 45 Degree Front Outside Configurations

See: 52 Degree Outside Configurations

See: 90 Degree Outside Configurations

Expand

title	How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Info
See Also: Bevel Type Examples

Image Removed

Image Added

Excerpt

hidden	true
name	Outside Bevel

The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface or simply cut at 90°.
- The matboard core is not visible from the front.

Image Added