Versions Compared

Version Old Version 13 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Select Openings on the Traced Object Type section.

  • Select the desired Opening.

  • Select Cut Later.

  • The Cut Order of the selected opening will change from within the other openings on the design, making the selected opening cut one opening later.

  • You can click the button again to move it again within the Cut Order. 

Image Removedatlassian-note

  • Select the desired Bevel/Cartridge Type that you wish to change the cut order from the Bevel/Cartridge Type Selection. 

    • Only the objects matching the bevel/cartridge type selection will be displayed. 

    • The other Bevel/Cartridge Type of the design on the screen will be grayed out.

expand

Traced Object Type

Panel
panelIconId

panelIcon:note:
bgColor#B3F5FF
Insert excerpt

titletitle

Cartridge

Bevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Expand

Cartridge
nameCartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Image Removed InfoImage Added

  • For instance, selecting Openings will only display and allow you to change the Openings. 

  • When you move your cursor across the design, only the Openings will be available to be selected and edited. 

Image Removed

Changing the Cut Order

Image Added