Cartridges Involved
This Configuration element involves the following Cartridges.
Note: Not all cartridges are available for all CMC models.
The Other Cartridge Adjustments Involve These Cartridges
Other Cartridge Adjustments
|
Select the Cartridge Adjustment to be Edited:
Width Adjustment (V-Groove)
Problem:
The V-Groove width is cut too wide/too thin.
Resolution:
Adjust The Outside Oval Rotation controls for Bumpsand Feathers on the outside cuts of Oval V-Grooves.Inside Oval Rotation (V-Groove)
Problem:
The Inside Oval V-Groove cuts with a Feather/Bump.
Resolution:
Adjust the Inside Oval Rotation on the Inside cut of an Oval V-Groove.
Horizontal Adjustment (Tool Specific)
Problem:
The Tool Object is applied in the wrong place Horizontally.
Resolution:
Vertical Adjustment (Tool Specific)
Problem:
The Tool Object is applied in the wrong place Vertically.
Problem:
Depth Setting (Tool Specific)
Problem:
The Tool is applied at the wrong blade depth.
Resolution:
Adjust the optimum Depth Setting.
The Depth Setting controls the Blade Depth for the non-blade Tool (Deboss, Pen or Vinyl).
Corner Pause (ms) (Tool Specific)
Problem:
The Tool is tearing the matboard.
Resolution:
Overshoot (Tool Specific)
Problem:
The Tool line is applied too long/too short.
Resolution:
Plunge (Tool Specific)
Problem:
The Tool line tears in the corner.
Resolution:
Install Pen
Problem:
How to calibrate the Pen Tool.
Resolution:
The Install Pen utility is used to calibrate the system for different Pens.
|
The Width Adjustment controls the width of the V-Groove lines.
Outside Rotation (V-Groove)
Problem:
The Outside V-Groove cuts with a Swoop/Flare.
Resolution:
Adjust the Outside Rotation.
Inside Rotation (V-Groove)
Problem:
The Inside V-Groove cuts with a Swoop/Flare.
Resolution:
Adjust the Inside Rotation on a Non-Oval V-Groove.
Outside Oval Rotation (V-Groove)
Problem:
The Outside Oval V-Groove cuts with a Feather/Bump.
Resolution:
Adjust the Outside Oval Rotation on the Outside cut of an Oval V-Groove.
Contents:
|  |