| Panel |
|---|
| panelIconId | atlassian-plus1f9d9-200d-2640-fe0f |
|---|
| panelIcon | :pluswoman_mage: |
|---|
| panelIconText | :plus:🧙♀️ |
|---|
| bgColor | #FFFAE6 |
|---|
| | title | 45°+ Outside Full DefinitionThe 45°+ Outside is created by cutting into the thicker fallout surface with the blade angled at 45°, thereby slanting the bevel under the fallout surface. The , hiding the matboard core is not visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. The Blade Depth must be above 16 in order for the CMC to prompt for the 45°+ Cartridge.
|
|---|
| Expand |
|---|
45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview. Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.
|
|  Image Added |
| Excerpt |
|---|
| hidden | true |
|---|
| name | 45 Degree Plus Outside |
|---|
|
|
...
...
...
The Bevel Type determines the initial blade plunge position.
Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.
...
See: 45 Degree Plus Outside Configurations
| Expand |
|---|
| title | How to Adjust the Configurations |
|---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
...