Versions Compared

Old Version 12

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Placing Matboard When Cutting from the Back

Info

When the

Cutting

Cut Preview screen indicates that the current layer is to be cut from the Back of the mat, this also determines how to place the matboard onto the CMC. 

  • Have Two Layers of adequate size of disposable matboard under the Mat to be Cut; a Layer can be temporarily removed when cutting thicker matboard.

  • Place the matboard into the left corner of the CMC, making sure that the matboard nestles tightly into the Horizontal and Vertical Clamps.

Expand
titleCut From the Back Definition

Cutting From the Back will cut with the face of the mat toward the CMC Board, and can be selected on the Cutting Preview.

Expand
titleBacking Board Definition

The Backing Boards are Two Sheets of matboard placed on the CMC behind the sheet of matboard being cut.

Insert excerpt
Backing Board
Backing Board
nameBacking Board Definition
Image Modified

  • When cutting from the Back, make sure the front of the matboard is facing the CMC.

Image Removed

Z1BoardBackOfMatUP2024800.pngImage Added

Default Settings