Content Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Image Removed

The Other Cartridge Adjustments Involve These Cartridges

Other Cartridge Adjustments

Image Removed

Select the Cartridge Adjustment to be Edited:

Width Adjustment (V-Groove)

Problem:

• The V-Groove width is cut too wide/too thin.

Resolution:

• Adjust the V-Groove Width Adjustment.

• The Width Adjustment controls the width of the V-Groove lines.

Image Removed

Outside Rotation (V-Groove) 

Problem:

• The Outside V-Groove cuts with a Swoop/Flare.

Resolution:

Image Removed

Inside Rotation (V-Groove) 

Problem:

• The Inside V-Groove cuts with a Swoop/Flare.

Resolution:

Image Removed

Inside Oval Rotation (V-Groove)  

Problem:

• The Inside Oval V-Groove cuts with a Feather/Bump.

Resolution:

Image Removed

Horizontal Adjustment (Tool Specific) 

Problem:

• The Tool Object is applied in the wrong place Horizontally.

Resolution:

• Adjust the Horizontal Adjustment for the Deboss, Pen or Vinyl tool.

• The Horizontal Adjustment controls where the Tool (Deboss, Pen or Vinyl) is applied Horizontally.

Image Removed

Vertical Adjustment (Tool Specific) 

Problem:

• The Tool Object is applied in the wrong place Vertically.

Problem:

• Adjust the Vertical Adjustment for the Deboss, Pen or Vinyl tool.

• The Vertical Adjustment controls where the Tool (Deboss, Pen or Vinyl) is applied Vertically.

Image Removed

Depth Setting (Tool Specific) 

Problem:

• The Tool is applied at the wrong blade depth.

Resolution:

• Adjust the optimum Depth Setting for the Deboss, Pen or Vinyl tool.

• The Depth Setting controls the Blade Depth for the Tool (Deboss, Pen or Vinyl).

Image Removed

Corner Pause (ms) (Tool Specific)  

Problem:

• The Tool is tearing the matboard.

Resolution:

• Adjust the amount of time to Pause in the corners, in milliseconds, when applying the Deboss, Pen or Vinyl tool.

• The Corner Pause is the amount of time, in milliseconds, to pause the application of the non-blade Tools (Deboss, Pen or Vinyl).

Image Removed

Overshoot (Tool Specific) 

Problem:

• The Tool line is applied too long/too short.

Resolution:

• Adjust the Overshoot. 

• The Overshoot controls how far past the end of the segment to apply the Tool (Deboss, Pen or Vinyl). This is similar to an Overcut.

Image Removed

Plunge (Tool Specific) 

Problem:

• The Tool line tears in the corner.

Resolution:

• Adjust the Plunge/Unplunge.

• The Plunge controls whether to Plunge/Unplunge between segments of an object when applying a non-blade Tool (Deboss, Pen or Vinyl).

Image Removed

Install Pen  

Problem:

• How to calibrate the Pen Tool.

Resolution:

• The Install Pen utility is used to calibrate the system for different Pens.

Image Removed

Image Removed

Outside Oval Rotation (V-Groove)  

Problem:

• The Outside Oval V-Groove cuts with a Feather/Bump.

Resolution:

Non-Blade Tool Cartridges. Contents: Child pages (Children Display) all true depth 0 allChildren true style sortAndReverse first 0

Image Added