changes.mady.by.user dani.simmonds
Saved on Aug 22, 2024
Click the Line button.
Click to place the two points of the Line:
Start Point
End Point
The drawn Line displays a Center Point which can be used to turn the Line into an Arc.
For Additional Information:
See Line Design Details for details displayed on the selected Line.
See Continuous Drawing to draw continuously without having to restart the current Drawing Tool command.
See the Auto Align Circuitsfeature to display alignment lines when the cursor lines up with the control points of another object.
Left-Click sets the Point under the Cursor.
Right-Click Snaps to the nearest Point.
Hold down the CTRL key to draw in Ortho Mode; i.e., Horizontally/Vertically only.
The Line/wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line.
The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).
After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an /wiki/spaces/FrameShop8x/pages/1942509136.
See: Line Tool Function
