Versions Compared

Old Version 1

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
45°+ Normal Bevel Open V-Groove Definition
Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFFAE6

  • The 45°+ Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart in thicker matboard.

  • Both the matboard core and the lower layer matboard surface are visible from the front.

45°+ Normal Bevel Open V-Groove Full Definition
Expand
title

  • The

45°+ Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart in thicker matboard. Both the matboard core and the lower layer matboard are visible from the front

  • Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    • First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop

*

    • .

    • Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

*

      • The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

      • However, it cannot be chosen as a standalone bevel type within

Designer

      • the Design Editor.

  • The black 45°+ Blade Cartridge is labeled with a 45° Angle Symbol and Plus Symbol on the end.

  • The 45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview.

  • Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type

dropdown control

  • Dropdown Control to edit the interior cut

configuration

  • .

  • Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type

dropdown control

  • Dropdown Control to edit the exterior cut

configuration

  • .

Image RemovedImage RemovedImage RemovedSee:
45PlusMetalBevelOpenVGrooveCartridge70800.pngImage AddedEnd45PlusCartridge70800.pngImage Added
Excerpt
hiddentrue
name45 Degree Plus Normal Bevel

...

See: 45 Degree Plus Normal Bevel Opening Configurations

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

...

Open V-Groove

  • The 45°+ Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart in thicker matboard.

  • Both the matboard core and the lower layer matboard surface are visible from the front.

  • The 45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview.

45PlusMetalBevelOpenVGrooveCartridge70800.pngImage Added

Full Definition: 45 Degree Plus Normal Bevel Open V-Groove