...
Cutting a Mat | |
|---|---|
The screen indicator will display if you are cutting from the back or the front of the mat. |  |
Place the matboard on the CMC when cutting from the back or cutting from the front. |  |
Click the Cut button on the Cutting Preview screen. |  |
If the motors on the CMC are disengaged, the user will be prompted to Align the Head. |  |
If the current layer uses a different blade cartridge or is a different mat thickness than the last layer cut, the user will be prompted to change the cartridge and/or blade depth. |  |
Change the Blade Cartridge Cartridge and Blade Depth as prompted, and click OK. |  |
After the Head is Aligned, the desired Blade Cartridge inserted and the Blade Depth adjusted as prompted, the CMC will begin to cut. | |
...