...
Oval Outside has a Bump | |
|---|---|
The blade returns to the outside of the starting point of an oval outside cut, creating a bump in the oval. |  |
Increase the Oval Rotation. |  |
The object will now cut correctly. |  |
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. |  |
Oval Outside has a Feather | |
|---|---|
The blade returns to the inside of the starting point of an oval outside cut, creating a feather in the oval. |  |
Decrease the Oval Rotation. |  |
The object will now cut correctly. | |
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. | |
...