...
Degrees of Rotation for Non-Oval Openings | |||
|---|---|---|---|
In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time. |  | Increase the Rotationto turn the foot block clockwise to correct for a Swoop. Decrease the Rotationto turn the foot block counterclockwise to correct for a Flare. |  |
Opening has a Swoop | |
|---|---|
The beginning of the cut swoops toward the non-oval opening. |  |
Increase the Rotation. |  |
When making adjustments, click the plus or minus button at the end of the desired field about five times. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. |  |
...