45 Degree Plus Drop | |
|---|---|
The 45 Degree Plus Cartridge* cuts the drop with a 45° bevel on thicker matboard such as 8-ply. *Older systems may have a yellow plastic 45°+ Cartridge. |  |
Select the 45 Degree Plus Drop Bevel Type | |
|---|---|
Select the 45°+ Tab on the Configurations screen. Select the specific Drop bevel type from the Current Bevel Type dropdown control.
|  |
Select the Area of Concern for 45 Degree Plus Drops Below: |
|---|
45 Degree Plus Drop Cuts the Wrong Depth When Using a SKU | |
|---|---|
Select this topic to adjust the Depth Bias. |  |
...
45 Degree Plus Drop Cuts the Wrong Size | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. |  |
45 Degree Plus Drop has a Swoop | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Rotation. |  |
45 Degree Plus Drop has a Flare | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Rotation. |  |
45 Degree Plus Oval Drop has a Bump | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. |  |
45 Degree Plus Oval Drop has a Feather | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. |  |
...