...
Opening Swoop | |
|---|---|
The beginning of the cut swoops toward the non-oval opening. |   |
Increase the Rotation. |  |
When making adjustments, click the plus or minus button at the end of the desired field about five times. Click OK and do another test cut.  Check the results of the cut and continue making adjustments until the desired outcome is achieved. |  |
Opening Flare | |
|---|---|
The beginning of the cut flares away from the non-oval opening. |   |
Decrease the Rotation. | |
When making adjustments, click the plus or minus button at the end of the desired field about five times. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. | |
Twisted Corner | |
|---|---|
A Twisted Corner is when the blade turns before retracting from the matboard, which tears the matboard and twists the corner. This is especially visible from the back of the mat. Check to make sure the Rotation hasn't been set to a high number. Optionally, see the Clean the Foot Block procedure for information on cleaning the foot block. Twisted corners can also be a symptom of oil/water in the Air Valve, or an issue with the Head. Check the Air Regulator for excess water. |   |