...
Current Bevel Type | |
|---|---|
Select the desired Cartridge Type Tab and then the bevel type you want to edit from the Current Bevel Type dropdown control before making adjustments. Select Current Bevel Type-Front of Mat if it is being cut from the front of the mat. |  |
...
Opening Swoop | |
|---|---|
The beginning of the cut swoops toward the non-oval opening. |   |
Increase the Rotation. |   |
Opening Flare | |
|---|---|
The beginning of the cut flares away from the non-oval opening. |   |
Decrease the Rotation. | |
Twisted Corner | |
|---|---|
A Twisted Corner is when the blade turns before retracting from the matboard, which tears the matboard and twists the corner. This is especially visible from the back of the mat. Check to make sure the Rotation hasn't been set to a high number. Optionally, see the Clean the Foot Block procedure for information on cleaning the foot block. Twisted corners can also be a symptom of oil/water in the Air Valve, or an issue with the Head. Check the Air Regulator for excess water. |   |