Page Comparison

Flap 2 Radius: Flap 2 Radius controls the radius on the Flap 2 tuck-in tab.

• Increase the Flap 2 Radius to increase the radius of the Flap 2 tuck-in tab.

• Decrease the Flap 2 Radius to decrease the radius of the Flap 2 tuck-in tab. 

Flap 2 Width: Flap 2 Width controls the depth of the tuck-in tab.

• Increase the Flap 2 Width to increase the depth of the tab.

• Decrease the Flap 2 Width to decrease the depth of the tab. 

Flap Width: The Flap Width determines the width of the folded flap that tucks into the box.

• Increase the Flap Width to increase the folded flap.

• Decrease the Flap Width to decrease the width of the folded flap. 

Grip Offset: The Grip Offset controls where the folded line is on the box.

• Increase the Grip Offset to move the folded line toward the outside of the box.

• Decrease the Grip Offset to move the folded line toward the inside of the box. 

Inner Flap Taper: The Inner Flap Taper controls how much the Inner Flap that folds to create the ends of the box is tapered to a narrower end.

• Increase the Inner Flap Taper to make the end more angled.

• Decrease the Inner Flap Taper to make the end more straight-cut. 

Inner Flap: The Inner Flap designates how long the inner flap is that folds to create the ends of the box.

• Increase the Inner Flap to make the flaps longer.

• Decrease the Inner Flap to make the flaps shorter. 

Lid Depth: The Lid Depth designates how deep the lid is and how deep it fits onto the box.

• Increase the Lid Depth to increase the depth for the lid.

• Decrease the Lid Depth to make the lid depth shallower. 

Lid Inner Taper: The Lid Inner Taper controls how much the Lid Inner Flap that folds to create the ends of the box lid is tapered to a narrow end.

• Increase the Lid Inner Flap Taper to make the end more angled.

• Decrease the Lid Inner Flap Taper to make the end more straight-cut. 

Lid Inner Flap: The Lid Inner Flap designates how long the lid inner flap is that folds to create the ends of the box lid.

• Increase the Lid Inner Flap to make the flaps longer.

• Decrease the Lid Inner Flap to make the flaps shorter. 

Lid Outer Taper: The Lid Flap Taper controls how much the Lid Outer Flap is tapered to a narrow end that folds over the inner flaps to create the ends on the box lid.

• Increase the Lid Outer Flap Taper to make the end more angled.

• Decrease the Lid Outer Flap Taper to make the end more straight-cut. 

Lid Outer Flap: The Lid Outer Flap designates how large the lid outer flap is that folds over the lid inner flaps to create the ends of the box lid.

• Increase the Lid Outer Flap to make the lid flaps longer.

• Decrease the Lid Outer Flap to make the lid flaps shorter. 

Offset: Offset is the distance between the Base and the Lid if you are cutting both pieces on the same piece of material. 

Outer Flap Taper: The Outer Flap Taper controls how much the Outer Flap is tapered to a narrower end that folds over the inner flaps to create the ends on the box.

• Increase the Outer Flap Taper to make the end more angled.

• Decrease the Outer Flap Taper to make the end more straight-cut. 

Outer Flap: The Outer Flap designates how long the outer flap is that folds over the inner flaps to create the ends and sides of the box.

• Increase the Outer Flap to make the flaps longer.

• Decrease the Outer Flap to make the flaps shorter. 

Tab Width: The Tab Width is the width of the tab that tucks into the box to lock the sides into place.

• Increase the Tab Width to make the Tab wider.

• Decrease the Tab Width to make the Tab narrower.