changes.mady.by.user dani.simmonds
Saved on Nov 18, 2024
This box Box consists of a base Base and a separate lidLid.
Note: If cutting thicker material, make sure that the thickness field accurately reflects the thickness of the material.
The
Base and
Lid can be Cut Separately.
Cut out the lid Lid and base Base of the box Box at the desired dimension.
Fold the lid Lid section along the creasing edges.
Fold the reinforcement tabs backwards along the creasing edges.
Fold in the inner tabs toward the center of the boxBox.
Fold the end of the box Box over the inner tabs.
As you fold the end of the box Box over, let the reinforcement tabs line up to the inside of the box Box sides.
The reinforcement tabs will line up to the inside of the box Box sides.
Repeat these steps to the other end of the box Box
Rotate the box Box if desired.
Fold the side of the box Box over the reinforcement tabs that are lined up to the inside of the boxBox.
Tuck the tabs of the box Box sides into the slots in the bottom of the boxBox, securing it in place.
The tabs will be inserted into the slots at the bottom of boxBox.
Repeat the steps on the other side of the boxBox.
Repeat the steps on the top of the boxBox.
Place the lid Lid on top of the baseBase.
The Archival Reinforced Shell Box is assembled.
