Versions Compared

Old Version 6

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 7

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Archival Reinforced Shell Box

Tip
Info

  • This Box consists of a Base and a separate Lid.

    • Note: If cutting thicker material, make sure that the thickness field accurately reflects the thickness of the material.

ArchReinShellBoxAngled800.png

  • Cut out the Lid and Base of the Box at the desired dimension.

ArchReinShellBaseLidCut800.png

  • Fold the Lid section along the creasing edges.

ArchReinShellBaseLidFolded800.png

  • Fold the reinforcement tabs backwards along the creasing edges.

ArchReinShellReinFoldedBackwards800.png

  • Fold in the inner tabs toward the center of the Box.

ArchReinShellTabIn800.png

  • Fold the end of the Box over the inner tabs.

ArchReinShellFoldEndOverTabReinFoldedBack800.png

  • As you fold the end of the Box over, let the reinforcement tabs line up to the inside of the Box sides.

ArchReinShellFoldEndOverTabReinInside800.png

  • The reinforcement tabs will line up to the inside of the Box sides.

ArchReinShellTuckDownReinInside800.png

  • Repeat these steps to the other end of the Box

ArchReinShellFoldedEnds800.png

  • Rotate the Box if desired.

  • Fold the side of the Box over the reinforcement tabs that are lined up to the inside of the Box.

ArchReinShellFoldEndOverReins800.png

  • Tuck the tabs of the Box sides into the slots in the bottom of the Box, securing it in place. 

ArchReinShellFoldEndOverReinsFolding800.png

  • The tabs will be inserted into the slots at the bottom of Box.

ArchReinShellFoldEndOverReinsFolded800.png

  • Repeat the steps on the other side of the Box.

  • Repeat the steps on the top of the Box.

ArchReinShellLidDone800.png

  • Place the Lid on top of the Base.

  • The Archival Reinforced Shell Box is assembled.

ArchReinShellBoxAngled800.png