Versions Compared

Old Version 32

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 33

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFFAE6

  • The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°.

  • This bevel angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

  • The Bevel Type determines the initial blade plunge position.

  • The Black 45°+ Blade Cartridge is labeled with a 45° Angle Symbol and Plus Symbol on the Cartridge end.

  • The 45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview.

  • Older systems may have a 45°+ Yellow Plastic Blade Cartridge. 

Contents:

Child pages (Children Display)
allChildrentrue
45PlusMetalBevelOpening70800.pngEnd45PlusCartridge70800.png
Excerpt
hiddentrue
name45 Degree Plus Cartridge

  • The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°.

  • This bevel angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type.

  • The 45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview.

45PlusMetalBevelOpening70800.png

Full Definition: 45 Degree Plus Cartridge Definition

...