Versions Compared

Version Old Version 46 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
The
Insert excerpt
Depth Bias
Formulainfo
Definition
The
Depth Bias
is used in conjunction with the Default Blade Depth for 4-ply. The formula is:

[(Default Depth) - 10]

For example, if the normal blade depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.
Definition
nameDepth Bias Definition

Enter Depth Bias

Info

  1. Select the desired Blade Cartridge Type Tab.

  2. Determine what the normal blade depth is for this cartridge.

  3. Subtract 10 from your Default Blade Depth.

    1. This may be a negative number.

  4. Enter the number into the Depth Bias field for this cartridge.

DepthBiasBladeDepth70800.pngImage Removed

  • If the Blade Depth is cut Too Deep, Decrease the Depth Bias.

  • If the Blade Depth is cut Too Shallow, Increase the Depth Bias.

panel
DepthBiasBladeDepth70800.pngImage Added
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

    • Default Settings

    TipDefault Settings: