Page Comparison

• The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°.

• This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The Bevel Type determines the initial blade plunge position.

• The Blade Depth must be above 16 in order for the CMC to prompt for the 45°+ Cartridge.

Image Removed

Image Added

Full Definition: 45 Degree Plus Cartridge Definition