Page Comparison

• The 45°+ Reverse Bevel Opening is created by cutting into the thicker matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface.

• The matboard core is not visible from the front.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The Blade Depth must be above 16 in order for the CMC to prompt for the 45°+ Cartridge.

• Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image Added

Full Definition: 45 Degree Plus Reverse Bevel Opening Definition