Versions Compared

Version Old Version 6 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
title

Bevel Type V-Groove Selection

Info

  • Select the desired V-Groove type from the dropdown control. 

  • Select the desired object you wish to Trace.

  • Select the desired Bevel Type/Cartridge Type from the Bevel and Cartridge Types dropdown control.

  • Click the Set button next to it to Trace it.

  • The object will change to the selected Bevel Type/Cartridge Type color.

Expand
titleInGroove and OutGroove

Note that the OutGroove (outside cut of the V-Groove) and InGroove (inside cut of the V-Groove) bevels cannot be saved with the design, so the design must be taken directly to the Cutting Preview after tracing it.

Expand
Insert excerpt
V-Groove

DefinitionClosed

The Normal Bevel

V-Groove

involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

ClosedVGroove70800.pngImage RemovedImage Removed

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations

nameV-Groove
Insert excerpt
V-Groove
V-Groove
nameIngroove/Outgroove Definition