Changing a Line into an Arc | ||||||
|---|---|---|---|---|---|---|
Expand | The /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor). The /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother. See: Arc Tool in Trace See: Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083 See: Splines Definition See: Convert Arc to Splines Function 
| |||||
The Line/wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor). After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an /wiki/spaces/FrameShop8x/pages/1942509136. See: Line Tool Function | ||||||
| Expand | ||||||
| ||||||
|
| Insert excerpt | ||||||
|---|---|---|---|---|---|---|
|
