Versions Compared

Old Version 3

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  • For Additional Information: 

    • Cut From Back Display

    Info

    • Cutting from the Back will cut with the back of the mat toward the operator, and can be selected on the Cut Preview.

    • The Cut Preview will display Back if the current layer is cutting from the Back of the mat. 

    • Toggling the Cut From Front toggle to On will display Front instead of Back.

    		panelImage Added
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    Default Settings

    TipDefault Settings:

    Expand
    titleCut From Back Definition

    Cutting from the Back will cut with the back of the mat toward the operator, and can be selected on the Cut Preview.

    • On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

      • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

      • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

      • V-Grooves have their own selection on the list.

    If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

    So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening. 

    Image RemovedImage Removed
    Image Removed