changes.mady.by.user dani.simmonds
Saved on Nov 01, 2024
When the Cut Preview screen indicates that the current layer is to be cut from the Back of the mat, this also determines how to place the matboard onto the CMC.
For Additional Information:
See Options > Switch Between Front and Normal Tools on the Cut Preview.
Select Cut From Front toggle to select whether to cut the design from the Front of the mat on the Cut Preview.
Default Settings: Cut from Front: Cutting Default Setting
Have Two Layers of adequate size of disposable matboard under the Mat to be Cut; a Layer can be temporarily removed when cutting thicker matboard.
Place the matboard into the left corner of the CMC, making sure that the matboard nestles tightly into the Horizontal and Vertical Clamps.
The Backing Boards are Two Sheets of matboard placed on the CMC behind the sheet of matboard being cut.
This protects the CMC’s metal surface and helps stabilize the mat being cut.
One sheet can be removed when cutting thicker material if needed.
When cutting from the Back, make sure the front of the matboard is facing the CMC.
See Options > Always use Normal Tool on the Cut Previewto toggle on/off this feature.
See Options > Cut From Front on the Cut Previewto select whether to cut the design from the Front of the mat.
See Options > Cut Front Tool on the Cut Previewto designate which cartridge to use when cutting from the front of the mat.
Cut from Front: Cutting Default Setting
