Versions Compared

Old Version 5

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 6

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cut From Back: Cut From Front Toggle Off: Cut Preview Options

Info

  • Use the Cut from Front toggle to select whether you want to cut from the Front or the Back of the mat.

  • Click the Cut From Front toggle to Off to cut the current layer from the Back of the mat. 

  • The Cut Preview will now cut from the back.

  • The Cut Preview Indicator will display Back.

Info

  • Mats containing elements that are administered to the Front of the mat (i.e., Deboss, Pen, V-Grooves, etc.,) will still force it to cut from the Front. 

  • The elements will be applied to the Front of the mat, and any Openings on that layer will also cut from the Front of the mat.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Tip
Expand
titleCut From Back Definition

Cutting from the Back will cut with the back of the mat toward the operator, and can be selected on the Cut Preview.

  • On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

    • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

    • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

    • V-Grooves have their own selection on the list.

If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening. 

Image RemovedImage Removed